Dry Ice Flash Removal Machine
Dry ice particles are blasted to remove burrs resulting from molding and processing of products.It can also be used for the surface cleaning of other metal and plastic parts without the danger of a dust explosion.
The servo motor and the module are synced to achieve fine positioning.
This machine is used for removal of burrs on injection molded frames for mobile phone front glass parts.
| Machine Size |
L4.3m x W3.3m x H1.9m |
|
Product Produced |
Plastic and Metal Parts |
|
Machine Requirements |
AC380V&AC220V 50HZ/60HZ 0.6Mpa |
|
Machine Accuracy |
Zero Burrs |
|
Size of Product Produced |
20-160mm x 20-160mm |
|
Notes |
The robot can be programmed to spray the dry ice in a variety of patterns for a variety of different parts |
Function：
The machine uses dry ice blasting to remove small burrs and flash material left over by injection molding and other machining processes.
Features：
1、Dry ice particles are blasted to remove burrs resulting from molding and processing of products.It can also be used for the surface cleaning of other metal and plastic parts without the danger of a dust explosion.
2、The servo motor and the module are synced to achieve fine positioning.
3、This machine is used for removal of burrs on injection molded frames for mobile phone front glass parts.
4、An automated guided vehicle transports the dry ice to the machine, which eliminates the need for laborers to carry the heavy dry ice pieces, and also the danger posed to humans working with dry ice directly.
